Mounted Reversible Ploughs

The KUHN MASTER 123, 153 and 183 mounted ploughs have a common goal: to help you reap the fruits of your investments quickly. The model you choose will depend on your working conditions and your needs:

• MASTER 123: 3 to 6 bodies for tractors from 65 to 210 hp.
• MASTER 153: 4 to 6 bodies for tractors from 95 to 270 hp
• MASTER 183: 5 to 7 bodies for tractors from 125 to 385 hp.

Mounted Reversible Ploughs

The MASTER L is the new mounted plough designed and manufactured by KUHN. This new series with a neat and robust design fits between the MASTER 153 and 183 series for tractors from 200 to 300 hp. Available from 4 to 6 bodies with a multiple or variable width system and in traction bolt or non-stop hydraulic safety.

Semi-Mounted Reversible Ploughs

The single-wheel semi-mounted LEADER ploughs have been developed to enhance your traction power and increase your work output. The MULTI and VARI-LEADER models are available from 6 to 8 bodies for tractors from 135 to 360 hp. The LEADER range perfectly meets the requirements of farms and contractors alike.

Semi-Mounted Reversible Ploughs

The CHALLENGER plough is the solution for high power tractors and extreme working conditions. It offers particularly high work rates thanks to its large working width. The semi-mounted CHALLENGER ploughs are available with Safe-T or NSH safety device from 7 to 12 bodies for powers from 200 to 500 hp.

Sub Soilers

The DC meets the needs of the operators: working efficiency, simple adjustments, reduced maintenance and longevity of use. This soil loosener is an accurate and reliable agronomic tool, by bringing effective loosening deep down. The DC is a versatile and innovative tool that will allow you to increase your potential yields and optimise your financial income.

Deep Disc / Tine Cultivators

The PEFORMER is a combined disc & tine cultivator which strengthens KUHN's position in the Minimum Tillage sector. Suitable for medium to high horsepower tractors (from 180 to 700 hp), this tool with discs and tines offers 4 actions in one single pass: chopping up, mixing or loosening, levelling and reconsolidating.

Stubble Cultivators

Stubble cultivation is important to efficiently managing weeds and incorporate residues into the soil after harvest. The KUHN OPTIMER + enables the user to perform rapid surface stubble cultivation. Material flow is key to achieving a high work rate, thanks to the large underframe clearance and one disc per arm design, this is possible.

Stubble Cultivators

The OPTIMER L 9000 and 12000 independent disc cultivators with 510 mm diameter discs enable shallow stubble cultivation and seedbed preparation for crop establishment. With working widths of 9 and 12 metres, they offer unbeatable work outputs of up to 20 ha/hour.The OPTIMER L 9000 and 12000 require a traction power of 270 to 480 hp.

Stubble Cultivators

The OPTIMER XL range is available in mounted and trailed models from 3 to 12 metres wide. These independent disc cultivators provide a working capacity from 5 to 15 cm deep and optimal penetration thanks to its larger discs (620 mm diameter). The OPTIMER XL range is adapted to tractors from 70 to 700 horsepower and offers a wide range of rollers to meet all requirements.

Disc Harrows

The DISCOVER XM2 disc cultivator stands out in the market with its self-supporting undercarriage. With discs in an X arrangement, a robust undercarriage and an efficient roller, this range allow you to increase your productivity. Available from 28 to 48 discs, these stubble cultivators can travel in many conditions and can be equipped with the SH small seed drill to combine two actions: stubble cultivation and seeding in one pass.

Rotary Tillers

All of KUHN's vineyards and orchards power tillers have a very compact design for working in narrow row spacings. While the EL 43 power tiller has an exceptionally low profile to pass safely under branches in orchards, the EL 62, 82 and 92 models have a low working width to overall width ratio.

Rotary Tillers

Good seedbed preparation promotes crop germination and root development to maximise yields. Discover the wide range of the KUHN power tillers from a working width of 2.50 m to 6.18 m. The large width El 122, El 162, El 282 and El 402R models are commended by large arable farms, mixed farms, market gardeners and contractors alike.

Power Harrows

HRB 122-152-182-202 power harrows are efficient in mechanical weeding in-between rows (vineyards/orchards) incorporating plant material into the soil and improving the soil structure.This range of power harrows offers working widths from 1.20 to 2.10 m for horsepower up to 80 hp.

Power Harrows

This power harrow range offers a working width from 2.50 m to 6 m. Rigid or foldable, they can be used solo or combined with a seed drill. Discover the key to get an optimal seedbed in all conditions.

Power Harrows

KUHN's new range of HR power harrows has a model to suit every condition as well as options adapted to your requirements. The HR 1020, 1030 & 1040 series power harrows with working widths of 3 to 4 m, can work in solo or in combination with a seed drill. The HR 1040 series power harrows are ideal for high-powered tractors up to 320 hp.

Power Harrows

Seedbed preparation tools must perform high work output while operating smoothly and non-stop for as long as necessary.These power harrows offer a working width from 6 to 8 m and are adapted to tractors of up to 460 and 500 hp respectively.

Mounted Strip Till

The 3-point mounted Gladiator® is available with 4 to 16 rows, with 30" to 40" spacing. The innovative folding toolbar increases transport stability and reduces folded dimensions. A variety of fertilizer options are available to suit a wide range of strip-till nutrient programs.

Trailed No-Till Mechanical Seed Drills

The SDE seeder is versatile and robust, with high cutting power of the straw and great flotation in the rows. The transmission system and metering units guarantee the highest precision for all crops.The Helica metering unit is able to accurately and homogeneously distribute fertilizers with any grain size and seed of the most varied small grains crops.

Seed Hoppers

This high-capacity front hopper TF 1512 is ideal for seeding crops and cover crops as well as serving as a fertiliser hopper. It's 1500 or 2000 L capacity makes it a high-performance combination.The TF 1512 hopper can be hitched to mechanical seed drills, precision seed drills and tillage tools.

Mounted Fertiliser Spreaders

Fertilising specialised crops (vines, orchards, hops, vegetables) and grain crops requires mastery and extreme precision.Discover the new mounted MDS .2 fertiliser spreaders with working widths from 10 to 24m and capacities from 500 to 2,000l.

Mounted Fertiliser Spreaders

Unique KUHN solutions cater for absolute spreading precision: EMC (Electronic Mass Control) adapts the application rate automatically and independently, on the left and right, during spreading.AXIS mounted fertiliser spreaders have working widths of 12 to 50 m and capacities from 1,000 to 4,200 l.

Trailed Fertiliser Spreaders

The AXENT 100.1 trailed model completes the KUHN range of fertiliser spreaders.With its 9,400 l hopper, it has exceptionally high maximum payloads, ideal for cash crop farms and contractors with different types of product to spread (granular fertiliser, lime, moist bulk, organic fertilisers...).

Trailed Fertiliser Spreaders

With wide working widths of 30, 32 and 36 m, fast ground speed and high-capacity hopper, AGT spreaders can achieve daily outputs of 400 ha and more. For maximum profitability in cost-intensive fertilisation, metering and fertiliser distribution have to be optimised in order to spread the right rate in the right place.

Front Tanks

The PF front-end sprayer is not just a simple front-mounted tank; it is a complete and independent sprayer.The 1,000 or 1,500-litre PF front-end sprayer offers the optimum distribution of weight on the tractor to maintain excellent stability, even on sloping terrain.

Mounted Sprayers

The OPTIS range represents the entry-level range of mounted sprayers; equipped with a steel boom, their simplicity and ease of operation will allow you to intervene rapidly on your crops with peace of mind.They are intended for livestock, multi-crop and market gardening farms.

Mounted Sprayers

OMNIS sprayers were designed from a simple and robust structure. They are intended for livestock, multi-crop and market gardening farms. They come with 800, 1000 and 1200 L tank capacities with numerous accessories as standard to ensure that good spraying practices are complied with.

Mounted Sprayers

The DELTIS 2 range represents the mid-range selection of KUHN mounted sprayers, perfectly adapted to multi-crop type farms. Five models of booms are available to meet all requirements, in lengths ranging from 15 to 24 metres.

Mounted Sprayers

The ALTIS 2 range is the top of the line of KUHN's mounted sprayers, perfectly suited to multi-crop and grain farms. Five models of booms are available to meet all requirements, in lengths ranging from 15 to 28 metres.

Trailed Sprayers

The LEXIS trailed sprayer represents the entry-level range of KUHN trailed sprayers, perfectly adapted to multi-crop and grain type farms. With a 2,400-L or 3,000-L tank and an 18 to 28m boom, the LEXIS will meet all your requirements.

Trailed Sprayers

100 ha before midday? It's now possible with the METRIS 2! The METRIS 2 trailed sprayer represents the heart of the KUHN trailed range, perfectly suited to grain farms. With a 3,200-L or 4,100-L tank and an 18 to 38-m boom, the METRIS 2 will meet all your requirements.

Trailed Sprayers

The OCEANIS 2 trailed sprayer represents the top of the range of the KUHN trailed sprayer range, perfectly suited to grain farms. With a 5,000-L or 7,700-L tank and a 24 to 48-m boom, the OCEANIS 2 will meet all your requirements.

Front Mounted Mowers

Available in 2 cutting widths (3.10 and 3.50m), GMD 1025 F series disc mowers,two models are available: GMD 3125 F and GMD 3525 F, are ideal for hilly ground, and perfectly adapted to medium-sized farms and agricultural contractors.

Mounted Mowers

The different widths of GMD 10 series are adapted to small and medium farm operations. Their compact design makes them perfectly compatible with smaller hp tractors.GMD 10 Series comprises 4 models from 1.60 to 2.80 metres: GMD 16 (1.60 m), GMD 20 (2.00 m), GMD 24 (2.40 m), GMD 28 (2.80 m).

Mounted Mowers

The different widths of GMD 100 series are adapted to small and medium farm operations. Their compact design makes them perfectly compatible with smaller hp tractors.GMD 100 Series includes 4 models from 2.40 to 3.51 metres: GMD 240 (2.40 m), GMD 280 (2.80 m), GMD 310 (3.10 m), GMD 355 (3.51 m).

Mounted Mowers

With a working width between 2.80 and 3.50 metres, the new GMD 105 series mowers are intended for farmers seeking improved ground following and forage ejection on uneven terrain.The GMD 105 series comes in 3 models: GMD 285 (2.80 m), GMD 315 (3.10 m), GMD 355 (3.50 m).

Mounted Mowers

Make your forage production profitable with the exclusive LIFT-CONTROL suspension system combined with NON-STOP safety. There are five GMD 1011 LIFT-CONTROL machines in this range, designed for tractors from 80 hp: GMD 2811 (2.67 m), GMD 3111 (3.10 m), GMD 3511 (3.51 m), GMD 4011 (3.95 m), GMD 4411 (4.35 m).

Triple Disc Mowers

Designed for tractors from 120 hp and available in three cutting widths, GMD 8730 (8.30 to 8.80 m), GMD 9530 (9.13 to 9.53 m) and GMD 10030 (9.53 to 9.93 m), this range provides maximum work output without compromising on the quality of the harvested forage. Intended for contractors, machinery cooperatives and large farms.

Trailed Mowers

With the large-width GMD 5251 TC trailed mower, you can mow up to 7 hectares a day with an ordinary tractor. The machines provide high work output with its 5.20m working width.Tractors from 120-130hp are ideal for them.

Front Mounted Mower Conditioners

When modernity and high-performance come together. FC 3125 F and 3525 F front mower conditioners with working widths of 3.11 and 3.50m respectively, and can be swivelled from left to right at an angle of up to 30° and can be moved vertically by up to 70 cm.

Rear Mounted Mower Conditioners

Available in three working widths (2.40 m, 2.80 m and 3.11 m), this range is ideal for medium to large-sized farms and contractors. Make your forage production profitable with the exclusive LIFT-CONTROL suspension system combined with NON-STOP safety.

Trailed Centre Pivot Mower Conditioners

FC 1060 TC mower conditioners come in five working widths (3.10 m to 4.40 m) and are designed for tractors from 80 hp. Manoeuvres are quicker due to the shorter central drawbar and the GYRODINE headstock. FC 3160 and 3560 TCD RA are available with a conveyor grouper unit.

Trailed Centre Pivot Mower Conditioners

Central drawbar: maximum output! FC 1061 TC mower conditioners come in five working widths (3.10m to 4.40 m). Manoeuvres are quicker with the central drawbar and GIRODYNE headstock. FC 3161 et 3561 TCD RA have grouper belt models.

Trailed Side Pull Mower Conditioners

Side pull: everything you need. FC 1060 TL mower conditioners come in four working widths (2.67 m to 3.50 m) and are designed for tractors from 75 hp. Manoeuvres are easy due to the GYRODINE headstock and low power requirement.

Trailed Side Pull Mower Conditioners

FC mower conditioners 1061 TL series with side drawbar come in working widths from 2.67 to 3.50 mand for tractors from 75 hp. Manoeuvres are easy due to the GYRODINE headstock and low power requirement.

Mounted Triple Mower Conditioners

Available in three widths (from 8.33 m to 9.93 m) and designed for tractors from 120 hp, they ensure maximum output without compromise on the quality of the harvested forage. They are intended for contractors, machinery cooperatives and large farms.

Tedders

The KUHN HAYBOB 300 and 360 tedder-rake combinations are universal haymakers, ideally suited for small to medium-sized farms. The HAYBOB offers excellent performance in a wide range of crops like grass and delicate legume hay crops and provides thorough tedding to uniformly spread wet crops for faster drying.

Tedders

GF 1002 tedders are simple and economical. They have 4 to 8 rotors, five working widths from 5.20 m to 7.80 m and a hydraulic folding system. They are perfect for farmers with a limited surface area to ted.

Tedders

GF 1012 T range include 8 and 10 rotor tedders with working widths of 8.70 m and 10.80 m. Narrow fields will no longer be an issue for users of these mounted tedders thanks to the HLC (Headland Lift Control) rotor lift system. Simply activate the valve to lift the rotors a minimum of 50 cm off the ground, in less than 5 seconds.

Tedders

GF 1012 range include 8 and 10 rotor tedders with working widths of 8.70 m and 10.80 m for medium to large-sized operations. They are equipped with the HLC (Headland lift Control) rotor lift system for fast and effective manoeuvres.

Tedders

GF 13012 and GF 17012 models produce high work output with their 12 and 16 small diameter rotors respectively. They have the GSC (Ground Save Control) system which enables them to follow the ground like a 4-rotor tedder with 50% less ground scraping.

Single Rotor Rakes

GA 300 GM 3201 G/GM and GA 3801 models of single rotor rakes are ideal for small farms. Fitted with 9 or 10 tine arms, these rakes work at widths of 3.20 to 3.80m.

Single Rotor Rakes

GA 4121 GM and GA 4321 GM single rotor rakes have MASTER DRIVE gearboxes, which are extremely reliable during intensive operations. The working widths of these machines are 4.10 m and 4.20 m respectively.

Central Delivery Rakes

GA 7631, GA 8131, GA 8731 and GA 9531 twin rotor rakes deliver central swaths. Grass is raked across a width of 7.70 m to 9.30 m. They are ideal for intensive operations thanks to their MASTERDRIVE GIII gearbox.

Central Delivery Rakes

GA 6501 P mounted twin rotor rakes deliver central swaths between 5.65 m and 6.40 m. Their raking quality is impressive and they produce perfect swaths for fast dry-down.

Central Delivery Rakes

GA 6501, GA 7501 + and GA 8121 twin rotor rakes deliver central swaths between 5.40 m and 8.00 m. Their raking quality is impressive and they produce perfect swaths for fast dry-down.

Central Delivery Rakes

GA 7631, GA 8131, GA 8731 and GA 9531 twin rotor rakes deliver central swaths. Grass is raked across a width of 7.70 m to 9.30 m. They are ideal for intensive operations thanks to their MASTERDRIVE GIII gearbox.

Side Delivery Rakes

GA 6002 twin rotor rakes deliver swaths to the side. The grass is raked across a width of 3.50 m to 5.80 m into one or two swaths. You can use this machine with low or medium hp tractors with no problem.

Side Delivery Rakes

GA 6632, GA 7932 and GA 9032 twin-rotor gyrorakes deliver side windrows. The grass is raked across a width of 6.50 m to 8.80 m. They are ideal for intensive operations thanks to their MASTERDRIVE GIII gearbox.

Side Delivery Rakes

The GA 6930, GA 7530, GA 8030 and GA 8830 twin rotor rakes are side delivery machines. The grass is raked across a width of 6.30 m to 8.80 m. They are ideal for intensive operations and working in difficult conditions thanks to their MASTERDRIVE GIII gearbox.

Four Rotor Rakes

The pasture octopus! GA 13131 and GA 15131 four-rotor rakes deliver central swaths. They work between 8.40 m and 14.70 m and feature a 100% hydraulic drive system which saves one hour of maintenance per day.

Belt Mergers

These belt mergers are ideal for contractors and machinery cooperatives but also for individual farms. The 2 independent pick-ups offer side or central delivery with several combination possibilities. With their adaptable pickup widths of 7.50 m up to 10.95 m, these mergers can rake up to 20 or 30 m of forage.

Wheel Rakes

Since the first introduction, the SpeedRake® name has been recognized for quality.Available in 8-, 10- and 12-wheel configurations, the SR 100 GII Series SpeedRake® wheel rakes feature working widths ranging from 15’10” to 23’4”.

Wheel Rakes

KUHN SR 300 Series SpeedRake® wheel rakes provide exceptional transportability and high-capacity raking to help you achieve optimum harvest productivity.Available in 10-, 12- and 14-wheel configurations, the SR 300 Series SpeedRake® wheel rakes feature working widths ranging from 20’10” to 28’.

Wheel Rakes

KUHN SR 600 GII Series SpeedRake® wheel rakes are high-capacity, bi-fold rakes designed to meet the needs of today’s progressive hay producers.Available in 12-, 14- and 16-wheel configurations, the SR 600 GII Series SpeedRake® wheel rakes feature working widths ranging from 25' to 31'.

Variable Chamber Round Balers

A wide range of variable round balers designed to produce dense 80 - 160/185 cm round bales – backed by over 40 years of experience. With six models and four intake options, there’s certain to be a KUHN VB round baler to boost the profitability of your baling operation.

Fixed Chamber Round Balers

At the top of the league, we offer the KUHN FB 3130 and FB 3135. These fixed chamber round balers are designed to provide you with the highest capacity in the toughest conditions across the world.With two models and a wide range of intake options, there’s a baler to suit your operation.

Baler Wrapper Combinations

The KUHN i-BIO+ is an ultra-compact and lightweight round baler-wrapper combination. With its low weight and excellent manoeuvrability, the KUHN i-BIO+ is perfectly suited to hilly conditions and use on small or wet fields with narrow access gates.

Baler Wrapper Combinations

Two technologies from KUHN are combined to create the FBP 3135 fixed chamber BalePack. This baler-wrapper combination begins with a standard FB 3135 fixed chamber baler with an OPTICUT INTEGRAL ROTOR merged with an innovative wrapping system.

Baler Wrapper Combinations

Based on the premium KUHN VB 3100 Series, the KUHN VBP 3100 Series variable chamber BalePacks are our versatility experts. These baler-wrapper combinations begin with a standard VB 3165 or 3195 variable chamber baler with an OPTICUT INTEGRAL ROTOR and merge it with an innovative wrapping system.

80cm Chamber Square Baler

The KUHN LSB 870 is the professional solution for the 80 x 70 cm bale size segment. The baler is designed for baling all types of crops. The single knotting system, supported by the TWIN STEP option, guarantees a highly reliable, simple knotting process.

80cm Chamber Square Balers

With the SB series KUHN releases a new generation of large square balers. The KUHN SB 890 is a double knotter large square baler in the 80 x 90 cm segment. The SB 890 is capable of working in various crops such as silage, hay, straw, lucerne, maize straw and sugar cane leaves.

120cm Chamber Square Balers

The KUHN SB 1270 X enables you to produce rock-hard, perfectly shaped bales (120 x 70) in the most challenging conditions. The baler is equipped as standard with a double knotting system and a stronger driveline to achieve ultimate performance.

120cm Chamber Square Balers

The SB 1290 baler is one of the toughest, most reliable large square balers for bale size 120 x 90 on the market. The baler combines high output and maximum reliability to serve as a perfect fit for professional crop producers.This professional machine is designed and built to last.

120cm Chamber Square Balers

The SB 1290 iD is designed to produce bales (120 x 90 cm) with an extremely high density in all crop conditions. Thanks to the patented TWINPACT plunger technique, the baler has a lower power requirement and lends to a more profitable baling operation.

Round Bale Wrappers

The KUHN RW 1410 and 1610 are trailed, self-loading wrappers offering greater versatility and efficiency. The RW 1410 will lift bales of up to 150 cm in diameter and 1000 kg, while the professional RW 1610 is capable of loading bales of up to 1200 kg.

Round Bale Wrappers

Does wrapping 100 bales per hour with 6 layers of film seem impossible? Not with the KUHN RW 1810 bale wrapper. With a 30% faster cycle time you can keep up with the fastest balers around. It is also capable of loading the heaviest bales of up to 160 cm in diameter, weighing 1400 kg.

Square and Round Bale Wrappers

The KUHN SW 4014 is a hybrid bale wrapper that can wrap large square bales, 80x50-130 cm, up to 200 cm in length, and round bales up to 150 cm in diameter. The versatile wrapper provides fast, cost-efficient and operator-friendly wrapping.

Forage Choppers

KUHN MC maize choppers offer the unique combination of high output at a low power requirement. The choppers are not only designed to chop top-quality forage but also offer you unmatched reliability. The MC range consists of 1, 2 and 4-row mounted choppers.

Single Auger Vertical 4-20 m³ Mixer

The PROFILE 1 CL mixers have 1 vertical auger, a large hopper and feed out via a cross-conveyor. Available in 9 to 15 m3 capacities, these machines are suited to herds of between 45 and 110 cattle. Compact size is the key feature of these PROFILE single auger mixer wagons.

Twin Auger Vertical 12-34 m³ Mixers

KUHN Knight VT 100 Series Vertical Maxx® twin-auger mixers are the ideal choice for dairy and beef producers. Four models available, the VT 132, VT 144, VT 156 and VT 168 offer capacities that range from 320 to 760 ft³. To best meet your mixing needs, choose from trailer, truck or stationary models.

Twin Auger Vertical 12-34 m³ Mixers

For producers with more moderate feeding cycles, but still require a large-capacity mixer, the VT 180 & 1100 models are an ideal choice. These two models range in capacity from 800 to 1,100 cubic feet and are available as a truck or trailer configuration.

Twin Auger Vertical 12-34 m³ Mixers

The PROFILE CROSSMIX 2 CS mixers have 2 vertical augers, recessed wheels, a narrow hopper and feed out via a cross-conveyor. Available in 14 to 20 m³ capacities, these machines are suited to herds of between 70 and 150 cattle.

Twin Auger Vertical 12-34 m³ Mixers

The PROFILE 2 CL mixers have 2 vertical augers, a large hopper and feed out via a cross-conveyor. Available in 18 to 34 m3 capacities, these machines are suited to herds of between 90 and 265 cattle. Available with single axles for the 18 to 26 m3 models and with bogie axles for the 28 to 34 m3 models.

Twin Auger Vertical 12-34 m³ Mixers

The PROFILE 2 DL mixers have 2 vertical augers, a large hopper and feed out via direct side doors. Available in 18 to 34 m³ capacities, these machines are suited to herds of between 90 and 265 cattle. Available with single axles for the 18 to 26 m³ models and with bogie axles for the 28 to 34 m³ models.

Triple Auger Vertical 28 to 45 m³ Mixer

The EUROMIX triple vertical auger mixer wagons come with cross-feeding and a large hopper and provide impressive delivery rates. Available in 28, 33, 39 and 45 m³ capacities, for dairy herds of between 140 and 360 cattle.

4 Auger Horizontal Mixers

The efficient material flow of the BTC 100 Series Botec® 4-auger commercial mixers results in fast mixing and a quick, complete cleanout, saving you time and money. Four models are available in truck or trailer configurations, with capacities ranging from 550 to 1,000 ft³.

Mounted Straw Blower and Feeder

PRIMOR 2060 S mounted all-fodder straw blower and feeder, with drive belt system and a capacity of 2m³. The PRIMOR 2060 S produces quality bedding that guarantees comfort for your animals: the pneumatic separating chamber concept ensures that straw is spread evenly over the full depth of the bedding area, at distances of up to 18m.

Mounted Straw Blower and Feeder

PRIMOR 2060 M mounted all-fodder straw blower and feeder, with POLYDRIVE system and a capacity of 2m³. The result is quality bedding and guaranteed comfort for your animals: the pneumatic separating chamber concept ensures that straw is spread evenly over the full depth of the bedding area, at distances of up to 18 m.

Semi-Mounted Straw Blower and Feeder

PRIMOR 2060 M semi-mounted all-fodder straw blower and feeder, with POLYDRIVE system and a capacity of 2m³. The semi-mounted PRIMOR 2060 M is particularly well-suited to low-powered tractors.

Trailed Straw Bedder and Feeder

The PRIMOR 3570 M has been designed and developed for farmers looking for a 3.5m³ straw bedder and feeder compatible with 50 HP tractors (70 HP for haylage bales). Thanks to its large capacity, the PRIMOR 3570 M cuts down on handling times: 1 bale with a diameter of 2m and 2 of up to 1.5m in diameter. The machine can easily accommodate square bales of up to 2.7m in length.

TrailedStraw Blower and Feeder

PRIMOR 4260 M CUT CONTROL all-fodder straw blower and feeder, with onboard cutting system and a capacity of 4.2m³. The same machine can therefore be used to put down short straw (cubicles) or long straw (bedded packs) while retaining the capacity to deliver long-fibre fodder (such as hay or haylage).

Trailed Straw Blower and Feeder

PRIMOR 5570 M trailer-mounted all-fodder straw blower and feeder, with POLYDRIVE system and a capacity of 5.5m³. The PRIMOR 5570 M is perfect for farmers in need of a high-capacity machine. It is now finally possible to load and distribute 3 round bales with a diameter of up to 1.5m, thanks to the unique UNROLL SYSTEM.

TrailedStraw Blower and Feeder

The PRIMOR 15070 M is a high-capacity (15m³) addition to the Kuhn all-fodder feeder and straw blower line. It is designed to take up to 4 cubic bales measuring 2.70 x 1.30 x 1.20 m, or 3 round bales up to 2 m in diameter (with the optional UNROLL SYSTEM).

Rear Discharge Manure Spreaders

KUHN Knight PS 235 and 242 ProSpread® apron box spreaders are non-commercial spreaders that provide an affordable option for producers without sacrificing quality. With capacities of 275 and 360 ft³, these machines are ideal for small dairy, feeder, and cow/calf operations.

Rear Discharge Manure Spreaders

The KUHN Knight PS 250, 260 & 270 ProSpread® apron box manure spreaders are high-capacity, non-commercial spreaders designed for feeder, cow/calf, and dairy operations that process a wide array of semi-solid and solid materials.

Rear Discharge Manure Spreaders

KUHN Knight 2000 Series ProPush® hydraulic push-type spreaders are designed to haul and spread solid materials from dairies and feedlots, including gutter manure, yard scrapings, bedding pack and feedlot manure. Two models are available with capacities of 365 to 515 ft³.

Rear Discharge Manure Spreaders

The KUHN Knight ProSpread® Commercial Series sets the standard for durability and versatility in the commercial box spreader class. Offering truck and trailer models across the line, with three discharge options, these high-capacity spreaders will efficiently spread a broad range of materials.

Side Discharge Manure Spreaders

If you need one machine to handle all of your diverse spreading needs, look to the KUHN Knight SL 100 Series ProTwin® Slinger® manure spreaders. Four trailer models are available with capacities ranging from 1,000 to 2,400 gallons.

Side Discharge Manure Spreaders

Maximize your productivity and performance with the KUHN Knight SLC 100 Series ProTwin® Slinger® manure spreaders. Truck-mount and trailer models are available with capacities ranging from 2,600 to 5,000 gallons.